Manufacturers
Limited Offer. The SOLAR-W features its very own built in solar panel,...
Extended high magnification observation is comfortable with eye fatigue...
Counterweights
Essential for balancing a telescope for imaging in DEC., along the dovetail. This is a Combination of a Stainless steel 1kg Levelling weight that is fitted with a V clamp, with a diameter 70mm this item fits Celestron, SkyWatcher, Vixen, and Baader 70mm rails (vixen/CG-5 style). This will counter the (lever arm &) weight from reducers, Barlows, larger...
3" Dovetail Clamp & 1kg Weight - 3" Losmandy-style dovetail clamp suitable for Losmandy, Astrophysics, Celestron and Baader 3" Losmandy-style dovetail bars. Also includes 1 x 1kg stainless steel weight with 1/4 thread for mounting on to the dovetail clamp. This will counter the (lever arm &) weight from reducers, Barlows, larger eyepieces,...
1kg Weight - If the included weights aren't sufficient you can buy additional weights separately. These can screw into either the dovetail clamp or other weights using the 1/4 thread.
LX850 Stainless Steel Counterweights #07631 and #07632. Extra counterweights for use when adding additional equipment such as cameras or heavy accessories to your Meade LX850 series telescope or mount. Features stainless steel construction for ultimate durability, and is threaded for counterweight shaft on the mount. Product carries full one year Meade...
LX850 Stainless Steel Counterweights #07631 and #07632. Extra counterweights for use when adding additional equipment such as cameras or heavy accessories to your Meade LX850 series telescope or mount. Features stainless steel construction for ultimate durability, and is threaded for counterweight shaft on the mount. Product carries full one year Meade...
For Meade 8" ACF and Schmidt-Cassegrain models. Balance heavy accessories attached to the front or rear of the telescope with this handy tube weight that attaches easily to the factory-prepared tube of your telescope. Attaches in minutes using existing accessory mounting bolts on your scope.
Tube Balance Weight System #07305 for Meade 10" ACF and Schmidt-Cassegrain models. Balance heavy accessories attached to the front or rear of the telescope with this handy tube weight that attaches easily to the factory-prepared tube of your telescope. Attaches in minutes using existing accessory mounting bolts on your scope.
Tube Balance Weight System #07319 for Meade 12" ACF and Schmidt-Cassegrain models. Balance heavy accessories attached to the front or rear of the telescope with this handy tube weight that attaches easily to the factory-prepared tube of your telescope. Attaches in minutes using existing accessory mounting bolts on your scope.
#1405 Tube Balance Weight System for Meade 14" ACF and Schmidt-Cassegrain models. Balance heavy accessories attached to the front or rear of the telescope with this handy tube weight that attaches easily to the factory-prepared tube of your telescope. Attaches in minutes using existing accessory mounting bolts on your scope.
#1404 Tube Balance Weight System for Meade 16" ACF and Schmidt-Cassegrain models #07310. Balance heavy accessories attached to the front or rear of the telescope with this handy tube weight that attaches easily to the factory-prepared tube of your telescope. Attaches in minutes using existing accessory mounting bolts on your scope.
Meade Extra 2 lb. Weight #07300 counterweight for Meade Tube Balance Weight Systems. These factory available additional weights permit considerable variation in the total weight possible for balancing.
Used in conjuction with the Dovetail L-Bracket, allows small telescopes with 1/4-20 tripod fitting (e.g.Skymax-90) to be used with the Star Adventurer
1 x Replacement Celestron Telescope Equatorial 1.2KG Weight 80x80x63mm (hole 13mm diameter)
Counterweight bar for use with Celestron's Astromaster CG2 and CG3 mounts
1 x Replacement Celestron Telescope Equatorial 2.2KG Weight 80x80x63mm (hole 13mm diameter)
Choose from the options on the right side
Additional 12 lb. counterweight for the Celestron Advanced VX Mount. Designed to match standard Advanced VX counterweights. Sturdy lock knob keeps the counterweight safely on the shaft Also fits the CG-5GT, EQ-6 & EQ-5 Mounts
This 17lb Counterweight Accessory is designed for CGX, CGEMII Series Computerized Telescopes or CGEM EdgeHD Series Computerized Telescopes. Also the CGEM & CGEM DX ranges - In short anything that is a CGEM or CGX. 11lb counterweight also available - 94203
This 22lb Counterweight Accessory is designed for CGX-L CGE Pro Series Computerized Telescopes or CGE Pro EdgeHD Series Computerized Telescopes.
This 11lb Counterweight Accessory is designed for CGX CGEM & CGEMII Series Computerized Telescopes or CGEM EdgeHD Series Computerized Telescopes.