Our stores

Our stores

Grovers Optics & Photo. 216 High Street. Northallerton

Manufacturers

New products

Grovers Toymaster 216 High Street, Northallerton DL78LW

Specials

A family business

Adapters There are 35 products.

per page
Showing 1 - 30 of 35 items
  • £ 19.95 Delivery In 1-5 Days* Tax included

    This 10mm spacer tube has a male and female M48x0.75 filter thread on each end. It's designed to help you achieve the required backfocus for imaging with CCD and DSLR cameras. It has a 2" OD barrel, which can be inserted into any 2" telescope focuser - just like an eyepiece or any other push-fit accessory.

    £ 19.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 24.95 Delivery In 1-5 Days* Tax included

    Please note: This part has been engraved in manufacture with an in-correct "35mm" label . They have a 50mm spacing. This 2" Precision Self Centering Adapter is designed to keep your telescope in collimation when you change accessories such as a CCD camera or eyepiece. Recommended for fast focal ratio telescopes where keeping collimation is critical.  

    £ 24.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 19.95 Delivery In 1-5 Days* Tax included

    This 20mm spacer tube has a male and female M48x0.75 filter thread on each end. It's designed to help you achieve the required backfocus for imaging with CCD and DSLR cameras. It has a 2" OD barrel, which can be inserted into any 2" telescope focuser - just like an eyepiece or any other push-fit accessory.

    £ 19.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 13.95 Delivery In 1-5 Days* Tax included

    This 30mm spacer tube has a male and female M48 filter thread on each end. It's designed to help you achieve the required backfocus for imaging with CCD and DSLR cameras. It has a 2" OD barrel, which can be inserted into any 2" telescope focuser - just like an eyepiece or any other push-fit accessory.

    £ 13.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 19.95 Tax included

    The Altair 50mm extension tube is precisely machined for a perfect fit.   Altair extension tubes have two thumbscrews making them ideal for astro-photography and heavy eyepieces or binoviewers. The accessory is clamped firmly from two angles, reducing flex in the optical train, unlike other extension tubes which have only one thumbscrew.

    £ 19.95 Tax included
    1-5 Days UK Delivery*
  • £ 19.95 Delivery In 1-5 Days* Tax included

    The M48 variable adapter is designed to help you fine tune the distance between your DSLR or CCD camera and your field flattener/coma corrector, for optimal results. The M48 thread used on this system is the same M48 thread used on standard 2" eyepiece filters. This is a very versatile system and many combinations are possible.

    £ 19.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 69.95 Delivery In 1-5 Days* Tax included

    The M48 2" OD spacer kit consists of 6x elements This system can be used in various combinations to achieve just about any spacing.

    £ 69.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 39.95 Delivery In 1-5 Days* Tax included

    The M48 2" OD spacer kit consists of 4x elements which can be stacked together in various combinations:   5mm, 10mm, 20mm and 30mm.

    £ 39.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 68.00 Delivery In 1-5 Days* Tax included

    This Baader 2" Clicklock Adapter is designed specifically for all Telescopes using the Newtonian Ring Dovetail The Baader 2" Clicklock Adapter locks eyepieces and accessories into place with a simple twist.

    £ 68.00 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 30.00 Delivered In 2-3 Weeks Tax included

    Baader heavy-duty 8" double mounting plate, for up to 100kg – pre-drilled for many bars and clamps, eg.: Baader Pan EQ clamps 190mm, 230mm, 370mm or an additional 8" Planewave Clamp.

    £ 30.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 115.00 Delivery In 2-3 Weeks Tax included

    £ 115.00 Tax included
    Ask For Delivery Time
    Delivery In 2-3 Weeks
  • £ 29.95 Delivery In 14-18 Days* Tax included

    Designed with internal 2 inch (m48) filter thread for direct DSLR coupling onto many  2 inch diagonals such as the very popular Herschel Wedge or 2 inch Maxbright Diagonal.

    £ 29.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 14-18 Days*
  • £ 65.00 Delivery In 1-5 Days* Tax included

    Screws directly to SCT telescopes with a standard 2" threaded back such as the Meade 8" and the Celestron 8" and 9 1/4"This Baader 2" Clicklock Adapter is designed specifically for all Telescopes using the Smaller 2" SCT Thread.  Locks eyepieces and accessories into place with a simple twist, So strong they can literally support an entire telescope...

    £ 65.00 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 11.95 Delivered In 2-3 Weeks Tax included

    For eyepiece sockets (18mm length). An off-axis systems or folding mirrors approaches often, the problem is that the receptacles of the normal eyepieces just 1-2cm are too short to adjust the sharpness level properly. 

    £ 11.95 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 33.00 Delivered In 2-3 Week* Tax included
    New

    With the S52/M68 adapter, all Baader Wide T-rings can be adapted directly to an M68 male thread. This allows your M68 telescope or accessories to be screwed firmly to your camera with the largest possible aperture.

    £ 33.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Week*
  • £ 14.00 Delivery In 1-5 Days* Tax included

    This adapter attaches to the M54 thread found under the rubber eyeguard of Hyperion fixed focal length eyepieces (full set 2454600), it extends the length of the thread on the eyepiece which is required in some configurations to eliminate some abberations when using Baader's Digital-T adapters for afocal projection photography

    £ 14.00 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 16.00 Delivery In 1-5 Days* Tax included

    Using one (or two) Fine Tuning Rings with one Hyperion eyepiece and you get the function of two/four eyepieces.

    £ 16.00 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 29.95 Delivered In 2-3 Weeks Tax included

    for 1.25 Inch eyepieces / 10mm focus travel

    £ 29.95 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 15.95 Delivery In 1-5 Days* Tax included

    £ 15.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 16.95 Available To Order Tax included

    This M48 spacer ring is the necessary addition in order to mount the MPCC Mark III directly onto the Baader protective EOS T-ring while securing the correct opticaldistance of 55mm and by utilizing the full M48 unvignetted aperture.

    £ 16.95 Tax included
    Ask For Delivery Time
    Available To Order
  • £ 8.00 Delivered In 2-3 Weeks Tax included

    System M68/0,3 – spacer ring 0,3mm thick, equals approx. 1/3 of rotation

    £ 8.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 7.50 Delivered In 2-3 Weeks Tax included

    System M68/0,5 – spacer ring 0,5mm thick, equals approx. 1/2 of rotation

    £ 7.50 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 7.00 Delivered In 2-3 Weeks Tax included

    System M68/1 – spacer ring 1mm thick, equals approx. 1 of rotation

    £ 7.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 85.00 Delivered In 2-3 Weeks Tax included

    Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the M68-system

    £ 85.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 84.00 Delivered In 2-3 Weeks Tax included

    measuring and guiding eyepiece

    £ 84.00 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 11.95 Delivery In 1-5 Days* Tax included

    £ 11.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 14.95 Delivery In 1-5 Days* Tax included

    T-2 Extension Tubes enable you to securely set or vary the spacing between T-2 components With an internal T-2 thread at one end and an external T-2 thread at the opposite end to enable easy linking together with each other or any other T-2 components. Full internal threading and blackening kills any stray light reflections.

    £ 14.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 15.95 Delivery In 1-5 Days* Tax included

    This adapter attaches to the M54 thread found under the rubber eyeguard of Hyperion fixed focal length eyepieces (full set 2454600), it extends the length of the thread on the eyepiece which is required in some configurations to eliminate some abberations when using Baader's Digital-T adapters for afocal projection photography

    £ 15.95 Tax included
    1-5 Days UK Delivery*
    Delivery In 1-5 Days*
  • £ 13.95 Delivered In 2-3 Weeks Tax included

    T-2 Extension Tubes enable you to securely set or vary the spacing between T-2 components.  

    £ 13.95 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
  • £ 21.95 Delivered In 2-3 Weeks Tax included

    This is a T2 threaded 1.25" visual back, with a T2 female thread on one side, and a standard 1.25" eyepiece holder on the other side. It can be used in many setups to attach to a male T-2 thread on telescope side and offers a 1.25" eyepiece holder to the user.

    £ 21.95 Tax included
    Ask For Delivery Time
    Delivered In 2-3 Weeks
Showing 1 - 30 of 35 items