Used VGC. Warranty unaffected 30...
This model is compatible with all 11" optical tubes. A Lens Shade/Dew Cap is a tube, of approximately the same diameter as ...
Protect your corrector lens from moisture and block excess light with the lens shade Dual Velcro strip adjust the shade to fit either a C6 or C8 optical tube
Choose The Right Strap Length From Drop Down Option Heater Straps Need A "Heater Controller" To Operate.
Elliptical split heater for Newtonian telescope secondary mirror. Geniune sealed silicon rubber with nichrome wire with 22awg wires.
Kendrick dew heater designed to fit behind the mirror of GSO RC-8, RC-10 and RC-12 Ritchey Chretien telescopes. A flexible, split ring design, which makes it very easy to install. It fits onto the back of the secondary mirror housing and is held in place by a thin layer of silicone glue (user provided).
Choose Outer Diameter or Telescope from the list on the right. How To Modify a Kendrick Standard Dewcap? - See Download Below
The new Kendrick heavy-duty "Prosumer" model with 4 individual adjustable heater ports and programmable power supply suitable for powering popular DSLR cameras. The Digifire 12 has all the Digifire 8 features, plus temperature control via sensors!
The new Kendrick heavy-duty "Prosumer" model with 4 individual adjustable heater ports and programmable power supply suitable for powering popular DSLR cameras.
The Kendrick standard dual channel dew heater controller is used with Kendrick dew heater strips, to warm your telescope, spotting scope or camera lens, eliminating fogging or dewing. It’s very simple, easy to use, compact, and lightweight.
The Micro Controller is designed for Astronomers and Astrophotographers who want the best in lightweight, compact, Grab'n'Go gear. Despite its small size, this controller is not small in its performance or build quality. It is well built using high quality components and well thought out.
RDF or Red Dot Finders often ship with modern refractor telescopes. The Kendrick RDF Dew Heater stops dew forming on the lens of your RDF finder and contains a small dimmer which dims the reticule light down to a more comfortable level for astronomy, preserving your night vision.
FireFly heaters for these finders. They are attached to the sides of these finders as shown above and the heat is transfered laterally into the optic of the finder, keeping the dew and frost free.
This heater is designed to work with Meade, Celestron, Orion and other Newtonians and Dobsonian telescopes with secondary mirrors attached to stalks. Available in two sizes. This model is product code KAI-2028-S for mirrors on a stalk with 1.25" outer diameter, producing 0.33 amps, 4 watts at 100% controller setting.
This heater is designed to work with Meade, Celestron, Orion and other Newtonians and Dobsonian telescopes with secondary mirrors attached to stalks. Available in two sizes. This model is product code KAI-2028 for mirrors on a stalk with 2" outer diameter, producing 0.8 amps, 10 watts at 100% controller setting.
This Dew Controller is built with modern digital electronics and fully supports Digital Pulse Width Modulation Duty Cycle Control (PWM). It is powerful enough to clear telescopes with large lenses such as triplets, unlike cheaper devices. Current consumption is very efficient so no heat or power is wasted.
Designed by Doctor Alex Colburn the new Revelation Pro Dew heater controllers are the ultimate product for controlling dew on your valuable instrument. Superb construction and clever design features deliver the best possible system to combat dew without fuss.